Audio: Sound bars Bush Classic Mini DAB Radio Cream

1. If you are missing radio stations, we would recommend performing an automatic channel scan on your radio and trying the following:
   • Move the radio to an open location, close to a window if possible.
   • Locate it further away from other devices to avoid any interference.
   • Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

2. If you are still missing stations, it may be down to your signal coverage. You can check the digital signal coverage in your area using this website here.

You can check the software version of your radio. In DAB or FM mode: 

1. Press and hold the Menu/Info button to enter the menu options 
2. Use the Tune/Select rotary control to scroll to ‘’. Press the Tune/Select rotary control to select. 
3. Use the Tune/Select rotary control to scroll to ‘’. Press the rotary control to select. 
4. Press and release the Menu/Info button to return to the station display.

We would recommend checking the following if your radio has no sound:

• Ensure the volume is turned up fully.
• Check if this is occurring on all stations, as it may be down to poor signal from a particular station.

If the issue is still occurring, try a power reset:

1. Disconnect the radio from mains/battery power.
2. Holding down Power/Standby button for 30 seconds.
3. Reconnecting the radio up and trying again.

If this has not resolved the issue, please use the contact details on this page.

To make the most out of your radio and get better signal we recommend the following:

• Move the radio to an open location, close to a window if possible.
• Locate it a bit further away from other devices to avoid any interference.
• Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

For more information about the digital radio signal in your area, we would advise checking using this website here.

• Check that the unit is not in standby by giving the power button/on/off button a quick press. 
• Try an alternative mains plug socket. 
• Change the fuse in the plug.

• Ensure you have selected Bluetooth mode on the soundbar. 
• Try disconnecting and reconnecting via Bluetooth. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again. 
• Ensure the device you are trying to connect to can send sound. If you are trying to connect with another speaker this will not work as the soundbar can only receive the sound, and cannot send sound.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have the correct mode selected. For example, Bluetooth. 
• Ensure any cables are securely fitted. 
• Ensure there are no audio devices nearby which may be disrupting the signal.

• Check that the unit is not in standby by giving the power button/on/off button a quick press. 
• Change the batteries in the remote. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again. 
• Try a camera test on the remote to check for the infrared signal. Put your smartphone in selfie mode, point the remote at the camera, and press some buttons. If the remote is working you should see a flicker at the end of the remote. If there is no light, it would indicate the remote is not producing a signal.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected AUX mode on the soundbar. 
• Turn on headphone volume on the connected device. If a TV, this is usually found within the sound menu. 
• Disconnect and reconnect the AUX cable. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected Bluetooth mode on the soundbar. 
• Try disconnecting and reconnecting via Bluetooth. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected Optical mode on the soundbar. 
• Disconnect and reconnect the Optical cable. 
• Change the TV’s sound setting to match the external speaker connected. For example, you may have an option for PCM (pulse-code modulation) which you can set. This is necessary to ensure the audio format matches that of the sound bar you have connected.