Audio: Radios Bush Wireless Charging Dab+ Clock Radio

You can reset your radio and restore all of the original factory settings. 

Note: If you reset your radio all of your stored station presets will be deleted. In DAB or FM mode: 

1. Press and hold the ‘Menu/Info’ button to enter the menu options 
2. Use the ‘Tune/Select’ rotary control to scroll to ‘’. Press the ‘Tune/Select’ rotary control to select. 
3. Use the ‘Tune/Select’ rotary control to scroll to ‘’. Press the ‘Tune/Select’ rotary control to select. 
4. ‘Factory Reset? Yes’ will be displayed. Use the ‘Tune/Select’ rotary control to scroll to ‘’. Press the ‘Tune/Select’ rotary control to select. 
5. ‘Restarting...’ is displayed. After a few seconds the display will change to ‘Welcome to Digital Radio’ and will then begin an automatic scan for DAB stations. A progress bar will show the progress of the scan and the number of stations found during the scan will also be displayed. When the scan is complete your radio will select the first available station and begin to play. Stations are listed in numerical and then alphabetical order by default.

1. Adjust the volume using the rotary control on your radio. 
2. Check that the mains power wall socket is switched on and that your radio is not in Standby mode. 
3. You may have headphones connected. Either use the headphones to listen to your radio or unplug the headphones. 
4. If you are using a Bluetooth connected device, increase the volume on the secondary device and on your radio. 
5. If you have batteries fitted, they may be exhausted and need to be replaced. Please use only good quality C size batteries.

1. If you are missing radio stations, we would recommend performing an automatic channel scan on your radio and trying the following:
   • Move the radio to an open location, close to a window if possible.
   • Locate it further away from other devices to avoid any interference.
   • Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

2. If you are still missing stations, it may be down to your signal coverage. You can check the digital signal coverage in your area using this website here.

1. Press and release the Power button on the front of your radio. Your radio will switch on and begin an automatic scan for DAB stations. A progress bar will show the progress of the scan and the number of stations found during the scan will also be displayed. 
2. When the scan is complete your radio will select the first available station and begin to play. Stations are listed in numerical and then alphabetical order by default.

You can check the software version of your radio. In DAB or FM mode: 

1. Press and hold the Menu/Info button to enter the menu options 
2. Use the Tune/Select rotary control to scroll to ‘’. Press the Tune/Select rotary control to select. 
3. Use the Tune/Select rotary control to scroll to ‘’. Press the rotary control to select. 
4. Press and release the Menu/Info button to return to the station display.

• Check that your Radio is in Bluetooth (BT) mode. 
• If you are not already in bluetooth mode, press and release the Mode button on the front of the radio until you are in this mode (check the display). 
• A tone will sound and Bluetooth’ will be displayed, following by Searching’, whilst your product searches for Bluetooth devices.
• If a device is already connected (paired) with your radio, ‘Connected’ will be displayed on the second line of the display.

We would recommend checking the following if your radio has no sound:

• Ensure the volume is turned up fully.
• Check if this is occurring on all stations, as it may be down to poor signal from a particular station.

If the issue is still occurring, try a power reset:

1. Disconnect the radio from mains/battery power.
2. Holding down Power/Standby button for 30 seconds.
3. Reconnecting the radio up and trying again.

If this has not resolved the issue, please use the contact details on the right side of this page to get further support.

To make the most out of your radio and get better signal we recommend the following:

• Move the radio to an open location, close to a window if possible.
• Locate it a bit further away from other devices to avoid any interference.
• Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

For more information about the digital radio signal in your area, we would advise checking using this website here.