Skip to main content
Bush Slimline Dishwasher - White

Welcome to the support page for your product. If you have a question to ask, need some advice or are having any issues, then please contact us using one of the options within this page. Please also scroll down this page to see further support information.

Register your product


Bush Service Line

UK
Opening hours
Mon - Fri
09:00 to 18:00
Sat
09:00 to 18:00
Sun
10:00 to 16:00

Bush Troubleshooting Tool

Resolve problems quickly with this easy-to-use tool.

Click to start the troubleshooter.

Frequently asked questions

You can register for your free Bush guarantee in a few simple steps by clicking here or watch the video below which will walk you through all the methods to register along with the benefits of doing so.


If you are out of guarantee and you do not have an extended warranty (breakdown care plan etc), we can still offer you a repair service.

Repair and Care will provide a prompt repair for white goods items that are under eight years old, please click here for more information and book your repair today.

If there are water marks left on dishes or cutlery, try the following:

  • Ensure the rinse aid has been topped up.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Water marks left
  • Any affected areas you can see

If the programme will not start, check the following:

  • Is there water going into the appliance? If not, check the inlet pipe and ensure the tap is fully open.
  • Check if a delay timer has been set.
  • Turn the appliance off, switch off from the plug and unplug. Whilst unplugged hold down the start/pause button for 10 seconds. Before switching back on leave the appliance for around 30 seconds, then switch back on.
  • Check that the door is closing properly.
  • Check for any error codes on-screen and refer to your user manual.
  • Ensure the filter has been fully removed and cleaned, and the filter housing area has been cleaned.

  • Check that the outlet pipe is not kinked.

  • Check the outlet pipe for any blockages.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Connections under the sink
  • Any affected areas you can see

If the spray arms aren’t moving, try the following:

  • Remove the spray arms and clean them by soaking in warm water and using an ear bud to clean the holes.

  • Ensure they are connecting correctly.
  • Check that water is entering the appliance by ensuring the inlet pipe is not kinked or blocked.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Spray arms
  • Connections under the sink
  • Any affected areas you can see

If the tablet dispenser is not closing, try the following:

  • Check the tablets inserted are not too large.
  • Check if it is clicking into place properly when closing.
  • Ensure nothing is obstructing it from closing.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Tablet area
  • Any affected areas you can see

If the tablet dispenser is not opening, try the following:

  • Check the water pressure on the appliance.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Tablet area
  • Any affected areas you can see

If there are food deposits left on dishes or cutlery, try the following:

  • Clean the filter and spray arms.

  • Ensure plates have been washed off/rinse before putting into the dishwasher.
  • Check the inlet pipe for any kinks or blockages.
  • Leave space between dishes.
  • Ensure the appliance has not been overloaded.
  • Check if the correct tablets have been used and that they are releasing during the cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Filter
  • Affected dishes or cutlery
  • Any affected areas you can see

If there are water marks left on dishes or cutlery, try the following:

  • Ensure the rinse aid has been topped up.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Water marks left
  • Any affected areas you can see
Your video guides

How to change your plugs fuse

How to install a dishwasher

Key dishwasher maintenence

Connecting Inlet and Outlet Pipes

Need to return your product?

This product is guaranteed for at least twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the purchase price refunded) where possible during this period by the dealer from who you purchased the unit.

The guarantee is subject to the following provisions:

  • The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.
  • The product must be correctly installed and operated in accordance with the instructions contained in the manual.
  • It must be used solely for domestic purposes. The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair.
  • Specifications are subject to change without notice.
  • Bush disclaim any liability for loss or damage arising from the breakdown of the product.
  • This guarantee is in addition to and does not diminish your statutory or legal rights.