Audio: Radios Bush Protection Alarm Clock
Welcome to the support page for your product. If you have a question to ask, need some advice or are having any issues, then please contact us using one of the options within this page. Please also scroll down this page to see further support information.
Bush Technical Support
- UK
- 0345 6040105
Opening hours
- Mon - Fri
- 08:00 to 19:00
- Sat
- 08:00 to 19:00
- Sun
- 10:00 to 16:00
The projector needs to be twisted to the front for the time to be showing the correct way. This means the time will be projected onto the wall directly in front.
If it is twisted backwards to the rear wall then it will appear back-to-front.
In standby mode, press and hold SET until the display flashes.
Whilst the display is flashing, repeatedly press HR and MIN respectively until the desired clock time appears.
Press and hold HR and MIN together for fast advance.
Press SET to confirm.
The hour and minute digits will stop flashing.
In standby mode, press and hold AL1/AL2 for 2 seconds.
The hour and minute digits will flash.
Whilst the hour and minute digits are flashing, set the alarm time by repeatedly pressing HR and MIN for fast advance.
Repeatedly press AL1/AL2 to set the alarm to wake to buzzer or radio.
The corresponding indicator light(s) will illuminate on the display.
- Press SLEEP.
- ‘90’ will illuminate on the display.
- Repeatedly press SLEEP to select the desired sleep time from 90, 80, 70, 60, 50, 40,3, 20, or 10 minutes.
- The radio will be turned off after the selected time has elapsed.
Press Power to switch the unit on.
The alarm clock will enter radio mode.
The radio frequency will briefly appear on the display and then return to clock time.
- To turn on or off the projection, press PROJECTOR ON/OFF.
- To focus the projected time, rotate the projector wheel.
- To change the projection to a desired angle, rotate the projector.
Press SLEEP until ‘OFF’ is selected.
Repeatedly press AL1/AL2 until the alarm indicator light goes out on the display.
You can register for your free Bush guarantee in a few simple steps by clicking here or watch the video below which will walk you through all the methods to register along with the benefits of doing so.
How to Use the Bush Projection Alarm Clock
What to do if Your Radio Has Poor Signal
How to Setup the Bush Projection Alarm Clock
This product is guaranteed for at least twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the purchase price refunded) where possible during this period by the dealer from who you purchased the unit.
The guarantee is subject to the following provisions:
- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.
- The product must be correctly installed and operated in accordance with the instructions contained in the manual.
- It must be used solely for domestic purposes. The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair.
- Specifications are subject to change without notice.
- Bush disclaim any liability for loss or damage arising from the breakdown of the product.
- This guarantee is in addition to and does not diminish your statutory or legal rights.
